Product Introduction
UV-int150+ Nhiệt độ cao Resistant máy đo năng lượng UV is a high-quality UV energy measuring instrument used to measure the UV energy of xử lý UV devices. The main Cảm biến of the measuring instrument is on the back, with a dải đo of 250~410 nanometers. The measurement can be directly read on the Màn hình on the front of the energy meter (Đơn vị: millijoules per square centimeter).
The energy meter adopts a special Nhiệt độ cao resistant design, equipped with a 3.6-volt Nhiệt độ cao resistant 125°C Pin. Due to the use of a special energy saving circuit, the Pin can last for giới thiệu 5000 hours.
Suitable for UV energy measurement in Nhiệt độ cao environments, such as conveyor belts, can be used in 125°C environment for a short time (20 seconds).
Technical Parameters
| dải đo | 0-10000 mW/cm² (upgraded to 2 times the original) |
|---|---|
| Màn hình Energy Range | 0-999999 mJ/cm² (Nhiệt độ cao resistant Màn hình protection treatment) |
| Spectral dải đo | 250-410 nm MAX:365nm |
| Maximum Heat Nhiệt độ | 85°C 125°C on conveyor belt (MAX: 20 seconds) |
| Product Kích thước | Diameter: 90mm Height: 12mm |
| Operation Switch | ON/OFF档 |
| Product Trọng lượng | Approx. 150g |
| Power Type | 3.6V Pin (special Nhiệt độ cao 125°C Pin) |
| Power Consumption | Approx. 20μA, can test giới thiệu 5000 hours |
| Shell Material | Aluminum |
Product Features
Nhiệt độ cao Resistant Design
Can be used in 125°C environment for short time, suitable for Nhiệt độ cao scenarios such as conveyor belts
Độ chính xác cao Measurement
dải đo 0-10000mW/cm², energy range 0-999999mJ/cm²
Long tuổi thọ pin
Uses 3.6V special Nhiệt độ cao Pin, can be used continuously for giới thiệu 5000 hours
Công nghiệp grade Quality
Aluminum casing, sturdy and durable, suitable for Công nghiệp environment use
Compact Kích thước
Diameter 90mm, height 12mm, Trọng lượng giới thiệu 150g, easy to carry and use
Easy Operation
Simple ON/OFF switch, directly read measurement results on the Màn hình
Application Fields
Mobile Điện thoại Casing Production
PCB Manufacturing
UV Board Production
Flooring Production
Plastic Button Manufacturing
Công nghiệp xử lý UV
Notes
Important Warnings
- Do not look directly or indirectly through refraction/reflection at đèn UVs, ensure that no part of the body is directly exposed to đèn UVs
- This máy đo năng lượng UV can withstand Nhiệt độ caos, no more than 20 seconds on the conveyor belt, Chịu nhiệt up to 125°C
- When using, please ensure that the back of the energy meter is aligned with the light source (the energy Cảm biến is on the back)
- After measurement, please turn off the energy meter switch (OFF) or set the Màn hình value to zero
Installation/Operation Steps
- Turn on the ON switch, the LCD (Màn hình) will show zero
- Place the máy đo năng lượng UV near the đèn UV light source, try to align its back to the light source
- Extend the irradiation time appropriately until there is a measurement Màn hình on the energy meter's Màn hình
- Turn off the energy meter switch (OFF) or set the Màn hình value to zero