Product Overview
UV-intLED150 UVChuyên dụng LED máy đo năng lượng UV is a high-quality UV energy measurement instrument specially optimized for LED Tia tử ngoại light sources.
This energy meter adopts Chuyên dụng LED design with spectral dải đo of 350-430 nanometers, suitable for LED 365nm-410nm universal Bước sóngs, specifically designed for đèn LED UV curing equipment energy measurement.
The main Cảm biến is located on the back of the meter, measurement results can be directly read on the front Màn hình screen (Đơn vị: millijoules/square centimeter), uses 3.6V lithium Pin, can last giới thiệu 10000 hours.
Technical Specifications
| Product Model | UV-intLED150 (UVChuyên dụng LED Model) |
|---|---|
| Product Kích thước | Diameter 90mm × Height 12mm |
| Test Cường độ Range | 0-10000 mW/cm² (Not Màn hìnhed) |
| Màn hình Energy Range | 0-999999 mJ/cm² (6-digit Màn hình) |
| Spectral dải đo | 350-430 nanometers |
| LED Bước sóng Adaptation | LED 365nm-410nm Universal |
| Nhiệt độ Resistance | 110℃/10 seconds |
| Power Type | 3.6V Lithium Pin |
| tuổi thọ pin | Can last giới thiệu 10000 hours |
| Housing Material | Aluminum housing |
| Product Trọng lượng | Approximately 150 grams |
Product Features
Chuyên dụng LED Design
Specially optimized for LED Tia tử ngoại light sources, Dải quang phổ 350-430 nanometers
Độ chính xác cao Measurement
Accurate LED Tia tử ngoại energy measurement, ensures LED process quality stability
Ultra Long tuổi thọ pin
Uses 3.6V lithium Pin, can last giới thiệu 10000 hours
Nhiệt độ cao Resistance
Nhiệt độ resistance 110℃, not exceeding 10 seconds on conveyor belts
Application Areas
UV-intLED150 UVChuyên dụng LED máy đo năng lượng UV is widely used in the following LED Tia tử ngoại application scenarios:
- đèn LED UV curing processes - Energy measurement for LED Tia tử ngoại curing equipment
- LED exposure equipment - Process control for LED exposure machines
- LED light source testing - Performance testing for LED Tia tử ngoại light sources
- LED process optimization - Optimization adjustment for LED Tia tử ngoại process parameters
- LED equipment matching - Matching detection for LED Tia tử ngoại equipment
Certified by National Institute of Metrology Hiệu chuẩn report
Safety Precautions
- Do not look directly at đèn UVs or observe through refraction/reflection
- Ensure no part of the body is directly exposed to đèn UVs
- This máy đo năng lượng UV can withstand Nhiệt độ caos, not exceeding 10 seconds on conveyor belts
- Ensure the device is within normal Nhiệt độ hoạt động range during use
Installation & Operation
- Turn ON the switch, LCD Màn hình shows zero
- Place the máy đo năng lượng UV near the đèn UV source, try to align its back toward the light source (since the energy Cảm biến is on the back), extend exposure time appropriately
- Wait until the Màn hình shows measurement results, for example 800 millijoules/square centimeter (800mJ/cm²)
- Turn OFF the energy meter switch, or reset the Màn hình value to zero
Related Sản phẩm
Recommended models: UV-int150 | UV-int140 | UV-int159 | UV-int160